How To Make Transparent Background On Photoshop 12.1

Download Article

One of the most useful skills you can learn in Photoshop is removing the background from an image. This will allow you to stick the subject in any moving picture that you want, without having to worry near blending backgrounds, or dealing with large expanses of plain white. There are a couple of ways to remove the background of an image, depending on how complex that background is. This wikiHow teaches you how to delete a background in Photoshop Elements.

1
Open an image with a solid background. This method works best if the groundwork is a solid color, or close to a solid color. Utilise the following steps to open and epitome in Photoshop:
- Click File
- Click Open.
- Select an image with a background yous want to delete.
- Click Open up.
ii
Create a layer from the background layer. You'll need to do this in the Layers panel. It is typically on the right side. Most images that haven't been edited before will merely have one layer called "Background". You'll demand to convert it to a standard layer in the Layers panel so that you lot can edit information technology. The Layers console is usually on the right side. If you don't see if, click Windows followed past Layers. Use the post-obit steps to create a layer from the background:
- Navigate to the Layers window.
- Right-click the Groundwork layer.
- Select Layer From Background….
- Leave the options at their presets and press OK.
Advert
three

Select the Magic Eraser tool. To select the Magic Eraser, click the Eraser in the toolbar to the left, then click the Magic Eraser icon at the bottom of the screen.^[1]
iv
Adjust the Magic Eraser settings. In one case you select the Magic Eraser, you will see some settings in the peak carte du jour bar in the upper-left corner. Set the following settings:
- Set Tolerance to xx-xxx. A depression tolerance will keep parts of your original paradigm from existence erased when you use the tool. If the Magic Eraser erases too much of your subject, lower the tolerance. If information technology doesn't erase plenty of the background, increase the tolerance. Utilise the following steps to suit the Magic Eraser settings.
- Bank check the Anti-alias box.
- Check the Contiguous box.
- Set Opacity to 100%
v
Click the background. The Magic Eraser volition remove all of the color that y'all clicked on, turning it into the transparent background.
- If the Magic Eraser erases something you don't desire to erase, y'all can press Ctrl + Z or Command + Z to undo the final affair you did. You can disengage several steps using the History panel to the right. If you lot don't see the History panel, click Windows in the menu bar at the superlative and select History.
half dozen
Erase whatever leftover background. If the groundwork is one solid color, you tin probably erase the entire background with ane click. If it has multiple colors, you may have to click different areas of the background to delete all of it. If there are any parts of the background around the edges of your bailiwick, you tin use the regular eraser tool to advisedly erases the remaining edges using single clicks.
- Click circle (brush) icon in the upper-left corner to display the brush card. Select one of the solid circle brushes. If you want to feather the edges around your shape, you can lower the Hardness level past about x% or and so.
- Press [ or ] to adjust the size of the brush.
vii
Relieve your epitome. You lot now take an object with a transparent background that can be overlaid onto whatever other existing paradigm. Y'all'll demand to save the iamge in an image format that supports transparent images. Apply the following steps to save your image:
- Click File
- Click Save as.
- Enter a name for the file adjacent to File Proper noun.
- Select PNG, GIF, or PSD in drop-down card side by side to "Format."
- Click Save

1

Open up Photoshop Elements. Information technology has black icon with an paradigm that resembles a camera shutter in the centre. Click the Photoshop Elements icon to open Photoshop Elements.
2
Open an image with a background yous desire to delete. This method works well with images that have a more circuitous groundwork. Apply the following steps to open an paradigm in Photoshop:
- Click File
- Click Open.
- Select an epitome with a groundwork you desire to delete.
- Click Open.
3

Select the Background Eraser tool. To select the Groundwork Eraser tool, click the icon that resembles an eraser in the toolbar to the left. Then click the Background Eraser tool at the bottom of the screen.
4
Set your brush options. You can fix the brush options in the panel at the top-left of Photoshop. Set the following castor options:
- Click circle (castor) icon in the upper-left corner to display the castor menu. Select one of the solid circle brushes.
- Fix the Hardness to 100% so that the edges of the brush remove as much as the center.
- Set the diameter to a size that works well with the image y'all take.
5
Fix the Limits to Contiguous. This will delete the color that y'all select in the circle, but just if the colors are touching. This will help keep from deleting colors inside the subject of the photograph, while merely erasing the groundwork.
- If you take spots of the epitome where at that place is groundwork inside the subject (wisps of hair that can be seen through, for example), employ the Dis face-to-face option to remove the background from within the isolated spots.
half dozen

Set a low Tolerance. A depression tolerance limits erasure to areas that are very like to the sampled color. A loftier tolerance erases a broader range of colors. Fix your tolerance between xx-30. If the Background Eraser erases part of the subject, lower the tolerance. If it doesn't erase enough of the background, raise the tolerance.
seven

Bring the pointer nearly to the border of the subject. You will see a circumvolve with pocket-size crosshairs in the center. The crosshairs show the "hotspot" and deletes the clicked color wherever information technology appears inside the castor circle. It also performs color extraction at the edges of any foreground objects, then that color halos are not visible if the foreground object is later pasted into some other paradigm.
8
Click around the edges of your subject. Use single clicks every bit you go around and erase the background effectually the edges of subject.
- Utilize single clicks close to the edge of the subject area in the photograph.
9

Check your progress. As you lot click and drag you'll encounter the checkerboard design appear in the areas y'all have erased. The checkerboard represents transparency.
10
Increment the eraser brush size and erase the rest of the background. You can either use the background eraser, or the regular eraser. Once you take cleared the background effectually the edges of your subject, y'all can increase the castor size and click and drag to make broad strokes to erase the remainder of the background
- You can press [ or ] to adjust the castor size while you piece of work.
- Press Ctrl + Z or Control + Z to undo whatever mistakes you make. You can also open the History console to the correct and get dorsum several steps. If yous don't run across the History panel, click Windows in the menu bar at the superlative and select History.
11

Advisedly erase any remaining background effectually the edges. If at that place is any remaining background around the egdes of the subject field, yous can reduce te size fo the eraser brush and advisedly erase the remaining background around the edges using single clicks with the regular Eraser tool.
12
Save your image. You now take an object with a transparent background that can be overlaid onto whatever other existing image. You'll need to relieve the iamge in an image format that supports transparent images. Employ the following steps to save your epitome:
- Click File
- Click Save as.
- Enter a proper name for the file next to File Proper name.
- Select PNG, GIF, or PSD in drop-downwards menu next to "Format."
- Click Save

Advert

1

Open Photoshop Elements. Information technology has black icon with an paradigm that resembles a camera shutter in the middle. Click the Photoshop Elements icon to open Photoshop Elements.
two
Open an paradigm with a background you want to delete. This method allows you to split up the subject area from the background without actually deleting the background.
- Click File
- Click Open up.
- Select an image with a background you lot want to delete.
- Click Open.
3

Select the Polygonal Lasso Tool. The Polygonal Lasso Tool has an icon that resembles an athwart shaped lasso. To access it, click the Lasso Tool in the toolbar to the left. And so click the Polygonal Lasso Tool at the bottom.
four

Aline the greyness line along the border of your subject and click. This sets the grey line in place and creates a new spot with a new line attached to your mouse cursor.
five
Trace the shape of your subject using the Polygonal Lasso Tool. Get along the edges of your subject area and click to create an outline around your subjects. Curved areas will crave more clicks to get the shape just correct. Straight lines don't crave as many clicks. Take your time and make sure the grayness line outlines the shape of your subject area as accurately as possible.
- Alternatively, yous tin endeavour using the Magnetic Lasso Tool in the Lasso Tool menu. It has an icon that resembles the Polygonal Lasso Tool with a magnet. The Magnetic Lasso Tool will attempt to detect the edge of your subject as you trace around the shape of your discipline. This may relieve you a little time, just it's non as accurate as the Polygonal Lasso Tool.
6

Click the starting point of your outline. When you end tracing the outline of your discipline using the Polygonal Lasso Tool, click the starting betoken of your outline to create a selection of your subject. When you create a option, you will observe the grey line how resembles a moving dashed line.
7
Add together or decrease areas of your outline. Later on you create a selection, yous tin can add together or subtract areas of your selection. This is useful if there are parts of your subject you forgot to trace, or if your select something that's not part of your selection. Use the following steps to add together or subtract from your choice:
- Add together: Select the Polygonal Lasso tool. Then click the icon that resembles two squares joined together at the bottom of the screen. Then use the Polygonal Lasso Tool to trace the surface area yous want to add together to your choice.
- Subtract: Select the Polygonal Lasso Tool. And so click the icon that resembles a square cutting out of another square at the bottom of the screen. Then use the Polygonal Lasso Tool to trace parts of your option you desire to remove.
8
Re-create and paste your selection. Yous can either copy and paste it into a new layer, or into another prototype. Use the following steps to re-create and paste your option.
- Click Edit in the menu bar at the top.
- Click Copy.
- Click Edit.
- Click Paste.
9

Turn off the background layer. To plow off the background layer of your image, click icon that resembles an eyeball at the next to the groundwork layer in the Layers panel to the correct. This disables the background layer and removes the background.
ten
Save your image. You now have an object with a transparent groundwork that tin can be overlaid onto any other existing image. Y'all'll demand to save the iamge in an prototype format that supports transparent images. Use the following steps to save your image:
- Click File
- Click Save as.
- Enter a name for the file next to File Name.
- Select PNG, GIF, or PSD in drop-down menu next to "Format."
- Click Save

Add New Question

Question

What format do I salve it in?

Save in the .png format to go on the groundwork transparent.
Question

How tin can I save an paradigm that I've erased the background in photoshop as a jpeg?

Click salvage, or save as and brand sure information technology is a jpeg.
Question

If I accidentally erase role of the image I'grand trying to continue, how practise I add it back?

Yous tin can go back an action by performing the Disengage (ctrl + z) function, or go to the history tab and select which steps y'all'd desire to become back.

Ask a Question

200 characters left

Include your electronic mail address to get a bulletin when this question is answered.

Submit

Advertizement

Video

The magic wand works best when the groundwork is one colour and at that place is a non similar outline around the image

Thanks for submitting a tip for review!

Advert

If you save this as a JPEG it will disengage all your work
Magic wand might delete office of your prototype if the background is similar to the epitome

Things You lot'll Demand

Photoshop Elements

About This Article

Article Summary X

1. Open an image in Photoshop Elements.
2. Select the Magic Eraser, Background Eraser, or Eraser tool.
3. Select a difficult brush.
4. Press [ or ] to adjust the castor size.
5. Employ a large, solid brush to erase the bulk of the groundwork.
6. Set the hardness of the brush to well-nigh xc%.
7. Zoom in and use single clicks with a pocket-sized brush effectually the border of the subject.
viii. Relieve the image as a PNG, GIF, or PSD file when the background has been erased.

Did this summary aid you?

Thanks to all authors for creating a page that has been read 943,514 times.